Mechanical Release Running Tool is a conventional rotational release running tool, with no…
The Right Hand Release Running Tool is designed to run and set both mechanical &…
Top Dress mill and polishing mills are run prior to tying seal nipple or seal nipple packer…
Top Dress mill and polishing mills are run prior to tying seal nipple or seal nipple packer…
Tubing Swivel sub is designed for upper string rotate freely and lower string remains Static…
Liner Tie back Nipple provide a new casing string to cover intermediate casing worn by…
Liner Tie Back Seal Nipple Packer is Single Grip, Compression Set, Liner Top Isolation…
Liner Wiper Plug Connector use with The Hydro Trip Pressure Sub. The Hydro Trip…
OM-SS-N1 Setting Sleeve for Mechanical Release Running Tool offers a Running Nut to…
OM-SS-N Setting Sleeve for Mechanical Release Running Tool offers a Running Nut to run…
Setting Sleeve can be provided with RH profile to run the string with RH running tool…
Setting Sleeve can be provided with RH profile to run the string with RH running tool…
OM-SS-HR Setting Sleeve use with Hydraulic Release Running Tool offers a HR profile to…
The Swab Cup Packer has two wire meshed Swab Cup Element. Which provides extra…
The Seal Joint is used in combination with the retrievable Pack off Bushing (RPOB). This…
The Hydro-Trip Pressure Sub is installed in the Tubing String below a Hydrostatic Packer…
Drill Pipe Wiper Plug cleans the work string after cementing. It then latches and seals into…
Liner Wiper Plug is designed to receive the Drill Wiper Plug and clean the Liner casing…
The premium liner-top packer is mechanically set with weight after the hanger is set and…
Compression Liner Packer without integral slip provide an excellent seal that can be used to…
Seal Joint is used in combination with the retrievable Pack off Bushing (RPOB). This…
Seal Joint is used in combination with the retrievable Pack off Bushing (RPOB). This…
The polish Bore Receptacle provides a high integrity honed seal bore above and below a…
Packer Setting Tool is designed to apply set down weight to mechanically set the Liner Top…
Hydraulic Release Running Tool is used to run and set the liner hanger with or without…
Lifting Nipple provides an interface between the Liner Hanger assembly and the Drill Pipe…
The Liner Hanger Debris Junk Screen should be run as part of the Setting Tool assembly to…
Latch type Landing Collar is used with mechanical set liner hangers to land the liner wiper…
The Hydraulically activated Collar is used with hydraulic set Liner Hangers to build…
The hydraulically activated landing collar with ball catcher sub is used when running…
The Rotating Hydraulic set liner hanger has outstanding rotation/pull capabilities, proven…
The Hydraulic Set Liner Hanger is a economical hanger that is ideal for Horizontal and…
Compression Liner Packer with integral slip provide an excellent seal that can be used to…
Oilmec premium mechanically set, rotating liner hanger is suited for hanging any length of…
The Liner Hanger is set mechanically with either right or left hand rotation , depending on…
The Pocket-slip hydraulic liner hanger has a unique compact design for highly deviated or…
The Pocket Slip hydraulic liner hanger with integral liner top packer has a unique compact…
The Hydraulic Set Liner Hanger is a economical hanger that is ideal for Horizontal and…
Copyright © 2025 Oilmec Drilling Equipments Pvt. Ltd.
Developed by Abacus Desk
